A Four-Probe Test Machine refers to a laboratory with an independent environmental control system, which usually has a large space to meet high-standard experimental requirements. This laboratory can create a stable experimental environment by adjusting temperature and humidity, avoiding interference from external factors on the experimental results. The design and installation of a laboratory not only affect the accuracy of experiments but also directly influence the service life of equipment and maintenance costs
The installation process of the Four-Probe Test Machine is complex and must be carried out strictly in accordance with the steps to ensure the normal operation of the laboratory.
1. Site preparation: Before construction, the site should be cleared to ensure that the ground is flat and stable. Check the reliability of supporting facilities such as water supply, drainage and power supply.
2. Infrastructure construction: Carry out infrastructure construction in accordance with the design drawings. The foundation should take into account the load-bearing capacity of the constant temperature and humidity equipment to prevent equipment damage caused by foundation settlement.
3. Wall and partition construction: When installing the wall panels of the laboratory, polystyrene or composite materials are usually selected, with good thermal insulation performance as the main consideration. According to different experimental requirements, partitions can also be set up to ensure the stability of the environment in each area.
4. Installation and commissioning of the equipment: Install the equipment in accordance with the manufacturer's manual. Special attention should be paid to the connection and sealing between the equipment to avoid vacuum failure. After installation is completed, conduct system debugging to ensure that the temperature and humidity are controlled within the preset range.
5. Environmental Testing and Adjustment: After all the equipment is operating stably, conduct environmental testing to monitor whether the temperature and humidity meet the requirements. If any deviation is found, it should be adjusted to ensure that the laboratory environment meets the standards.
Share this page with your family and friends.