If you have just opened the box of the HQD Glow Air 70K , the device might look a little unfamiliar at first. There are pods, refill containers, and a few pieces that need to be connected before you can start using it. For someone new to pod devices, that can feel slightly confusing.
The good thing is that the setup is actually very simple. Once everything is connected, the device works automatically when you inhale. There are no complicated settings and nothing technical to figure out. After the first setup, using the device becomes second nature. This guide walks you through how to prepare the HQD Glow Air 70K Pods and start using the device properly, just like someone would explain it in a vape shop.
Take Everything Out of the Box
Start by taking the device and pods out of the packaging and laying them out in front of you. You will usually find the main device along with pods and refill containers that hold the liquid. Before assembling anything, take a quick look at the pods. You may notice small silicone caps or protective seals placed on the mouthpiece or connection points. These are only there to keep the pods sealed during shipping. Simply remove them so the airflow and liquid system are open. It only takes a moment, but this step is important because the device will not work properly if those seals are left in place.
Prepare the HQD Glow Air pods.
Once the packaging is removed, the next step is preparing the HQD Glow Air Pods. Each pod connects to a refill container that holds additional liquid. This is what allows the HQD Glow Air 70K to provide a long-lasting experience without constantly replacing parts. Attach the refill container to the pod and push it gently until it fits securely. You should feel it settle firmly into place. After connecting the pieces, leave the pod for a short moment. This gives the liquid time to soak into the coil inside the pod. Waiting a minute helps ensure that the first puff tastes smooth and full of flavour.
Insert the pods into the device.
Once the pods are ready, slide them into the device. The slots inside the HQD Glow Air 70K are designed to hold the pods firmly. Just push the pod into the slot until it sits securely. The magnetic connection will keep it in place. Make sure the mouthpiece lines up at the top of the device so it feels natural when you inhale. At this point most of the setup is already done.
Turning the Device On
Some versions of the HQD Glow Air 70K include a simple power feature that prevents the device from activating accidentally. If your device has a power button, press it a few times quickly to turn it on. Once the indicator lights up or the screen becomes active, the device is ready. Many users notice that the device also activates automatically when they take a puff, which makes the process even easier.
Taking Your First Puff
Now comes the easiest part. Place the mouthpiece between your lips and take a slow inhale. The HQD Glow Air 70K will detect the inhale and activate automatically. There is no need to press any buttons while using the device. The airflow sensor inside the device handles everything. A slow, steady puff usually produces the best flavour and vapour.
Switching Between Flavours
One feature that many users enjoy about the HQD Glow Air 70K is the ability to switch between two flavours. The device can hold two HQD Glow Air Pods at the same time. When you feel like changing the flavour, simply move the flavour switch on the device. This activates the second pod and instantly changes the flavour you are vaping. It is a small feature, but it adds a lot of variety and keeps the experience interesting throughout the day.
Charging the Device
The HQD Glow Air 70K uses a rechargeable battery that powers the device. When the battery level gets low, connect a charging cable to the port located at the bottom of the device. Charging usually takes a short amount of time, and the battery indicator will show when the device is fully charged. Keeping the device charged helps maintain consistent performance and flavour.
A Few Simple Tips for New Users
If this is your first time using HQD Glow Air Pods, there are a few small habits that can make the experience better. Try to take slow and steady puffs rather than very quick inhales. This allows the coil to heat evenly and improves the flavour. If you install a new pod, allow it to sit for a minute before using it so the liquid can fully soak into the coil. It also helps to keep the device upright when possible so the liquid flows properly inside the pod. These small things make a noticeable difference over time.
When to Replace HQD Glow Air 70K Pods
Eventually the liquid inside the pods will run out. When that happens, you may notice that the flavour becomes weaker or the vapour production decreases. That simply means the HQD Glow Air Pods need to be replaced. Removing the pod and installing a new HQD Glow Air 70K pod only takes a few seconds. Once the new pod is in place, the device will be ready to use again.
Final Thoughts
The HQD Glow Air 70K might seem slightly complicated when you first open the box, but in reality it is designed to be very easy to use. After the pods are prepared and inserted, the device does most of the work on its own. You simply inhale, and the device activates automatically. With the ability to switch flavours and use HQD Glow Air 70K Pods easily, the setup quickly becomes familiar even for someone who has never used a pod device before. Once you have used it a couple of times, the whole process feels effortless.
FAQs
How do I start using the HQD Glow Air 70K for the first time?
When you open the box, take the device and pods out and remove any small protective seals you see on the pods. After that, attach the refill containers to the HQD Glow Air 70K Pods and slide the pods into the device. Once they are in place, the setup is basically done. All you need to do then is take a gentle puff from the mouthpiece and the device will start working automatically.
Do I need to refill the HQD Glow Air Pods myself?
No, you do not have to refill anything yourself. The HQD Glow Air Pods are designed to work with refill containers that come with the device. Once you connect the container to the pod, the liquid feeds into the pod gradually while you use it. So you do not need to worry about filling bottles or handling liquid.
How do I switch flavours on the HQD Glow Air 70K?
Switching flavours on the HQD Glow Air 70K is very easy. The device can hold two pods at the same time. If you feel like changing the flavour, just use the flavour switch on the device, and it will move to the second HQD Glow Air Pod. You can switch back whenever you want, which makes it nice if you like changing flavours during the day.
How will I know when the HQD Glow Air 70K Pods are finished?
You will usually notice it through the flavour. When the HQD Glow Air 70K Pods are running out of liquid, the taste becomes weaker and the vapour may feel lighter than usual. That is usually the sign that it is time to replace the pod with a new one.
Is the HQD Glow Air 70K easy for beginners to use?
Yes, it is actually quite simple once you set it up the first time. After installing the HQD Glow Air Pods, there are no complicated steps. The device activates when you inhale, so you do not have to press buttons or adjust settings. For many new users, it feels straightforward after just a few minutes of using it.
Share this page with your family and friends.