Aluminum sheet 6061 with excessive energy, good corrosion resistance. It is usually used inside the pipe thread tapping tapping processing. Due to the excessive viscosity of aluminium plate 6061 t6 uncooked cloth, breaking the chip feature is bad, so in the tapping method in reality indicates chip scraping workpiece thread or tap chipping and different look, affecting the processing energy and thread best.
6061 aluminum sheet inventory in the mold preheating temperature of 400 ~ 425 ℃, the punch draft perspective of one °, the forming stress is 100 ~ 115MPa, protecting strain time is five ~ 10s, kneading out of the notable fine Shaft container castings. The final selected the best technical parameters: forming stress is 200MPa, mold temperature is 400 ℃, protecting stress time is 15s. Below the technical parameters, the castings are arranged finely and the grains are exceptional. The effect absorption paintings at -50 ℃ reaches 21.8J, that is extra than five instances that of the commonplace solid ZG25MnCrNiMo low aluminum alloy steel.
The primary differences betwee 6063 aluminum sheet and 6061 aluminium alloy plate:
1. The contemporary aluminum alloy body is aluminum sheet 6061 6063 t3 t6 t8 used in each materials.
2. Strength: aluminum sheet 6061 is best slightly stronger than 6063 aluminum sheet.
3.However at the entire, aluminum 6061 t6 sheet is a higher uncooked cloth. Due to the fact 6063 contains a high percentage of different metals, welding, managing is rather difficult, specifically 7075 (the latter two digits represent the alloy content) it's miles a higher share, it is also now not used as a body. In comparison, the 6061 may be changed in numerous ways to growth its energy, due to its low content of different metals.
Share this page with your family and friends.